Plex & Streaming

How to Enable GPU Transcoding on Your Appbox

The card is there as soon as your GPU Appbox is active, but nothing uses it until you flip one setting. Here's that setting for Plex, Jellyfin and Emby, and how to check it's working.

A GPU Appbox shares an NVIDIA RTX PRO 4000 with the other GPU Appboxes on the server. The card is there from the moment your plan is active, but nothing uses it until you flip one setting in your media server. This guide covers that setting for Plex, Jellyfin and Emby, how to check it's really working, and the few things the card doesn't do.

If you're not on a GPU Appbox yet, the plans are here. Already have an appbox with us? Open a ticket and we'll move you over, apps and data included.

First: do you need it at all?

The GPU only does one job, which is re-encoding video. If your devices play your files as they are (Direct Play), the server is just sending a file and no GPU is involved. That's still the best outcome, with or without a card.

The GPU earns its keep when the server has to convert:

On a normal appbox each of those is a CPU job, and a 4K one can eat the whole thing. On a GPU Appbox the card takes the encode.

Plex

You need Plex Pass. Hardware transcoding is a paid Plex feature, and without Plex Pass the setting does nothing even on a GPU Appbox. That's Plex's rule, not ours.

Your Plex is already connected to the card. We do that when the plan is activated, so there's nothing to install.

  1. Open Plex in your browser and go to Settings > Server > Transcoder.
  2. Click Show Advanced at the top right.
  3. Tick Use hardware acceleration when available.
  4. Leave the HEVC video encoding option on Never (see below for why).
  5. Click Save Changes. No restart needed.

In the list of transcoding devices the card can show up as "Unknown NVIDIA (2c33)". Plex doesn't have a name for this model yet. It's the right card and it works.

Check that Plex is using it

Play something and drop the quality in the player to force a conversion, 720p is fine. Then click the Activity icon at the top of Plex Web, open Dashboard and look at Now Playing. Switch on the playback details and you should see (hw) next to the video line. If it says Transcode without (hw), the conversion is running on the CPU. The usual reasons are no Plex Pass on the account that owns the server, or the setting above not saved.

Why HEVC encoding stays on Never

With HEVC encoding switched on, Plex freezes on some Dolby Vision files. The stream says (hw), the player sits there, nothing plays. It's a bug in Plex's transcoder with files that carry both Dolby Vision and embedded timecode data, and there's no setting that works around it. Never is Plex's own default, and with it those files convert to H.264 and play fine. You lose a bit of efficiency on remote streams. You don't lose anything else.

Jellyfin

No subscription needed. Jellyfin's hardware transcoding is free.

  1. Go to Dashboard > Playback > Transcoding.
  2. Set Hardware acceleration to Nvidia NVENC.
  3. Leave Allow encoding in HEVC format off.
  4. Scroll down and click Save.

That moves the encoding onto the card, which is the expensive half of a transcode. We tested it on a GPU Appbox with a stock install: a 1080p file converted to 720p at about six times playback speed, and a 4K HEVC file to 720p at about two and a half times, on a server that was busy with other things.

Two limits, so you know what to expect:

Check that Jellyfin is using it

Start a stream that needs converting, then open Dashboard > Activity (or the playback info overlay in the player). It should say the video is being transcoded to H264. To see the card itself working, use the SSH command further down while the stream is running.

Emby

Emby sees the card too. Hardware transcoding in Emby needs Emby Premiere, the same way Plex needs Plex Pass.

With Premiere active, go to Settings > Transcoding and switch hardware acceleration on. Emby lists the NVIDIA encoders it found on that page, so if you see NVENC entries there, it has picked up the card.

Watching the card from SSH

If you like numbers, log in over SSH while something is transcoding and run:

nvidia-smi --query-gpu=utilization.encoder,utilization.decoder,memory.used --format=csv

The encoder figure goes above zero when a transcode is on the card. Don't worry about the process list in plain nvidia-smi saying "No running processes found". You can only see your own account's processes from your shell, and Plex runs in its own container, so that list stays empty even mid-stream. The usage figures are the ones to read.

The card is shared, so the numbers include everyone's streams on that server, not only yours.

What doesn't use the GPU

It's not working

Run through these before opening a ticket:

Related

15+ years of seedbox hosting 4.9/5 Trustpilot (301 reviews) 113+ one-click apps

Ready to Get Started?

Set up your own media server in under two minutes.